Huceen

Kindly browse your automation parts that you are looking for on this page! MISEL does offer automation parts from other brands as well such as SIKO, WAGO, AUTONICS, FUJI, and many more. In addition, we also offer support services such as product introduction, installation to our customers who purchase automation parts.
To get further details especially about price and availability status of products, don’t be hesitate to contact our marketing team. We are always available to assist you to get your automation needs. Thank You!

E 200SMART
H7 1200

CPU ST30 DC/DC/DC

Categories: E7 200smart CPU

Description

E7 200Smart CPU Standard Edition，CPU ST30 Transistor，18DI/12DO,1*RJ45，2*RS485，3*100KHz high-speed pulse, Expandable to 6IO

Overview

  • Model Number: E7 288-1ST30-0AA1
  • Description: Standard CPU ST30, Transistor type
  • Dimensions: 110 x 100 x 81 mm
  • Power Consumption: 18W
  • Current Available: 
    • SM Bus: max. 1400mA
    • 24V DC: max. 300mA

Memory

  • Program Memory: 18 KB
  • Data Memory: 12 KB
  • Retentive Memory: 10 KB (permanent data preservation)

I/O Capabilities

  • Digital Inputs: 18 (sinking/sourcing type)
  • Digital Outputs: 12 (Solid-MOSFET, source-type)
  • Analog Inputs/Outputs: 56 words input (AI) / 56 words output (AQ)
  • High-Speed Counters: 6 total 
    • Single-phase: 4 at 200kHz, 2 at 30kHz
    • Quadrature phase: 2 at 100kHz, 2 at 20kHz
  • Pulse Outputs: 3 at 100kHz
  • Timers: 
    • Non-holding: 192
    • Holding: 64
  • Counters: 256
  • Cycle Interrupts: 2, with 1ms resolution (T32, T96)
  • Bit Memory: 256 bits
  • Interrupt Edges: 4 rising and 4 falling

Communications

  • Ethernet: 
    • 1 port, supporting 10/100 Mbps
    • 8 active clients, 8 active servers (PUT/GET protocol)
    • 8 active, 8 passive connections (open-type communication)
  • Serial Ports: 
    • 2 x DB9-RS485
    • 1 x CM01-RS485-RS232
  • Transmission Rates: 
    • Ethernet: 10/100 Mbps
    • RS485: 9600, 19200, 187500 bps, 1200-115200 bps
  • Isolation: 
    • Ethernet: Transformer isolation (1500VDC)
    • RS485: No isolation

Power Supply

  • Input Voltage: 20.4V to 28.8V DC
  • Input Current: 
    • CPU only: 190mA (without 300mA sensor power supply)
    • With sensor: 470mA
    • Including CPU and all expansions: 680mA
  • Inrush Current: 6A at 28.8V DC
  • Sensor Voltage: 20.4V to 28.8V DC

Digital Input

  • Number of Inputs: 18
  • Input Type: Sinking/Sourcing (IEC Type 1 sinking, except for I0.0 to I0.3)
  • Allowable Continuous Voltage: Max. 30VDC
  • Surge Voltage: Max. 35V DC (0.5s duration)
  • Logic 1 Signal: 
    • 4V DC minimum for I0.0 to I0.3 and I0.6 to I0.7
    • 15V DC at 2.5mA for other inputs
  • Logic 0 Signal: 
    • 4V DC maximum for I0.0 to I0.3 and I0.6 to I0.7
    • 5V DC at 1mA for other inputs
  • Optical Isolation: 500V AC for 1 minute

Digital Output

  • Number of Outputs: 12
  • Output Type: Solid-MOSFET (source-type)
  • Voltage Range: 20.4V to 28.8V DC
  • Surge Current: 8A (100ms max duration)
  • Rated Current: 0.5A per output point
  • Switching Frequency: Not specified
  • Turn-on/Turn-off Delay: 
    • Qa.0 to Qa.3: Max. 1µs turn-on, 3µs turn-off
    • Qa.4 to Qb.3: Max. 50µs turn-on, 200µs turn-off
  • Optical Isolation: 500V AC for 1 minute